Skip to content
Logo
  • English
    • German

Alpha direct Balance base station

  • Device overview
  • Intended use
  • Electric connection
  • Automatic hydraulic balancing
  • Commissioning mode
  • Montage
  • Maintenance
  • Dismantling

Alpha direct Balance Switch NFC base station

  • Register description
  • Automatic hydraulic balancing
  • Electric connection
  • Maintenance
  • Dismantling
  • LED signaling

Alpha direct Balance Downloads

  • Alpha direct Balance Downloads
  • Alpha direct Balance Downloads
  • Alpha direct Balance Switch Downloads
  • Certificates
  • Data sheets

Alpha direct Balance FAQs

  • Is the OEM Alpha direct Balance System compatible with other thermostat components with their own controls?
  • Can any thermostats be used with the base station?
  • Does the OEM Alpha direct base station need to be calibrated?
  • Is the base station capable of cooling?
  • Do circuit control valves or other balancing devices need to be fitted to the distribution network?
  • Can a boiler be controlled?
  • Can the OEM Alpha direct Balance open the thermostat valve periodically during the summer to stop it from getting stuck?
  • Are flow indicators still required for the OEM Alpha direct Balance System?
View Categories
  • Systamauswahl
  • Systemauswahl
  • Alpha direct Balance Switch
  • Alpha direct Balance Switch NFC base station
  • LED signaling

LED signaling

FunctionColor Explanation
BoilerGreenOn: Boiler request active
Off: Boiler request inactive
Pump Green On: Pump request active
Off: Pump request inactive
Flashing: Temperature limiter/dew point sensor active
Mains voltageGreen On: Device in operation
Off: Device not in operation
Flashing: Commissioning mode active
Fuse RedOn: Fuse defective
Change overBlue On: Cooling mode active
Off: Heating mode active
8 room thermostatsGreen On: active thermostat signal, heating request
Off: inactive thermostat signal, no heating request
Flashing (long – short): active controller signal, heating request, room is currently not participating in load balancing
Flashing (long – long): Cooling lock display
Factory resetRedower LED flashes red quickly for 5 sec, all other LEDs are off
First Open
Function
Green/
orange
Power LED flashes alternately green/orange + input LEDs are lighted during function; all other LEDs (pump, boiler, CO, etc.) as in normal mode
Manual open functionGreen/
orange
Power LED flashes alternately green/orange + CO LED flashes + ; all other LEDs (input LEDs pump,
boiler, etc.) as in normal mode
Updated on April 9, 2024
Dismantling

© 2024 | 300724

  • Supportrequest
  • Privacy Statement
  • Imprint
  • Supportrequest
  • Privacy Statement
  • Imprint