---
title: Diagrams
description: "**Signal input** ![](https://faq.testumgebung.digital/wp-content/uploads/2024/05/Exportdatei_Kennlinie.svg) --- **Functional diagram** without valve path recognition, fixed valve path ![](https://faq.testumgebung.digital/wp-content/uploads/2024/05/MPM_Steuereingang_Antriebsweg_en.svg) **Functional diagram** with valve path recognition ![](https://faq.testumgebung.digital/wp-content/uploads/2024/05/MPM_Steuereingang_Ventilweg_en.svg) **.NOTE.** The mechanical backlash between the actuator and the valve adapter, as well as backlash in the gear unit…"
url: "https://faqdoc.info/en/systemauswahl/motoric-valve-drive-6/motoric-valve-drive-6-24-v-modbus-en/diagrams-3/"
updated: "2024-07-22"
category: "Motoric Valve Drive 6: 24 V modbus"
---

# Diagrams

**Signal input**

![](https://faq.testumgebung.digital/wp-content/uploads/2024/05/Exportdatei_Kennlinie.svg)

---

**Functional diagram**
without valve path recognition, fixed valve path

![](https://faq.testumgebung.digital/wp-content/uploads/2024/05/MPM_Steuereingang_Antriebsweg_en.svg)

**Functional diagram**
with valve path recognition

![](https://faq.testumgebung.digital/wp-content/uploads/2024/05/MPM_Steuereingang_Ventilweg_en.svg)

**.NOTE.**
The mechanical backlash between the actuator and the valve adapter, as well as backlash in the gear unit of the actuator, are detected as valve path. This has an effect on the position display and the control bandwidth is minimally reduced. Deviating from the actual valve lift, an approx. 1 mm higher valve path is shown in the display.