{"id":7156,"date":"2024-05-13T13:09:40","date_gmt":"2024-05-13T12:09:40","guid":{"rendered":"https:\/\/faq.testumgebung.digital\/docs\/non-knowledgebase\/app-functions-3\/"},"modified":"2024-05-13T13:51:49","modified_gmt":"2024-05-13T12:51:49","password":"","slug":"app-functions-3","status":"publish","type":"docs","link":"https:\/\/faqdoc.info\/en\/systemauswahl\/motoric-valve-drive-6\/motoric-valve-drive-6-24-v-modbus-en\/app-functions-3\/","title":{"rendered":"App functions"},"content":{"rendered":"\n
FUNCTION<\/strong><\/td>DESCRIPTION<\/strong><\/td>DISPLAY<\/strong><\/td><\/tr>
DEVICE OPERATIONS<\/td><\/td><\/td><\/tr>
Read<\/strong><\/td><\/td><\/td><\/tr>
Read from device<\/td>Reading out the settings of the OEM Motoric Valve Drive: 24 V Modbus RTU<\/td>\u2013 Ready to scan:Hold your smartphone near to NFC tag<\/strong> \u2013 Display:Data was read successfully<\/strong>orError message<\/strong>\u2192 Repeat the process: The mobile device was moved too early or should be aligned more precisely.<\/td><\/tr>
Read from file<\/td>Prerequisite for use:<\/strong> File stored on the mobile device. <\/strong>\u2013 Reading the settings from a file stored on the mobile device Ways to store a file on the mobile device:\u2013 Sending files as attachments by message or e-mail\u2013 Storage of file by Write to file<\/strong> command<\/td>Display of the file management of the mobile device<\/td><\/tr>
Write<\/strong><\/td><\/td><\/td><\/tr>
Write to device<\/td>Settings are written to the OEM Motoric Valve Drive: 24 V Modbus RTU<\/td>\u2013 Ready to scan:Hold your smartphone near to NFC tag<\/strong> \u2013 Display:Data was read successfully<\/strong>orError message<\/strong>\u2192 Repeat the process: The mobile device was moved too early or should be aligned more precisely.<\/td><\/tr>
Write to file<\/td>Scanned settings are stored as a file in the memory of the mobile device.The file can be used for\u2013 the dispatch by message or mail\u2013 the installation of additional OEM Motoric Valve Drive: 24 V Modbus RTU<\/td>Display of the file management of the mobile device<\/td><\/tr>
Verify<\/strong><\/td><\/td><\/td><\/tr>
Verify device<\/td>Comparison of the settings displayed in the Settings <\/strong>menu and the settings in the OEM Motoric Valve Drive: 24 V Modbus RTU<\/td>\u2013 Ready to scan:Hold your smartphone near to NFC tag<\/strong> \u2013 Display:Data was read successfully<\/strong>orError message<\/strong> \u2192 Repeat the process: The mobile device was moved too early or should be aligned more precisely.Result:Validation successful<\/strong>: identical settingsorVerification failed<\/strong>: different settings<\/td><\/tr>
Active operations<\/strong><\/td><\/td><\/td><\/tr>
Start initialization<\/td>Initialization of the OEM Motoric Valve Drive: 24 V Modbus RTUThe actuator travels along the actuator path and valve path. The opening and closing points of the valve are stored.<\/td>Your device will now begin with the initialization process.<\/strong><\/td><\/tr>
Go to position<\/td>Setting the actuator position<\/td>Sequence:1. Go to position<\/strong>2. Confirm<\/strong>3. Ready to scan:Hold your smartphone near to the NFC tag.<\/strong>4. your device will now go to the specified position<\/strong>orError message<\/strong>\u2192 Repeat the process: The mobile device was moved too early or should be aligned more precisely.<\/td><\/tr>
Factory reset<\/td>Adjusts the parameters of the OEM Motoric Valve Drive: 24 V Modbus RTU to the delivery state.<\/td>Sequence:1. Warning message2. Scan process<\/td><\/tr>
Settings<\/strong><\/td><\/td><\/td><\/tr>
Force<\/td>Setting the force in the levels:100 N, 125 N, 150 N, 200 N<\/td><\/td><\/tr>
Runtime<\/td>15 s\/mm, 30 s\/mm<\/td><\/td><\/tr>
Valve path recognition (VPR)<\/td>ON | OFF<\/td><\/td><\/tr>
Display illumination<\/td>ON | OFF<\/td>Turns the LCD backlight on or off.<\/td><\/tr>
Drive path<\/td>2 \u2013 8.5 mm<\/td>Limitation of the actuator path when the VPR is switched off. Use as a “limiter”.<\/td><\/tr>
Bypass<\/td>0 … 50 %<\/td>Limitation of the actuator travel in the other direction.Application:<\/strong> Ensure minimum flow to protect against frost. Note:<\/strong> Both the rubber diaphragm in the valve and the backlash in the adapter and the gear unit can influence the position. Please check the position!<\/td><\/tr>
Valve position<\/td>mm | %<\/td>Sets the preferred display on the LC display.<\/td><\/tr>
Baud rate<\/td>4.800 | 9.600 | 19.200<\/td>Setting the interfaceAdoption of changes after restarting the OEM Motoric Valve Drive: 24 V Modbus RTU.<\/td><\/tr>
Parity<\/td>None | Even | Odd<\/td>None<\/strong>if necessary, set 2 stop bits at the masterEven<\/strong>+1 stop bitOdd<\/strong>+1 stop bitAdoption of changes after restarting the OEM Motoric Valve Drive: 24 V Modbus RTU.<\/td><\/tr>
Address<\/td>1 … 247<\/td>Setting the Modbus addressAdoption of changes after restarting the OEM Motoric Valve Drive: 24 V Modbus RTU.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n

.<\/mark><\/strong>NOTES<\/strong><\/mark>.<\/mark><\/strong><\/mark>All modifications must only be carried out with the appropriate expertise. An incorrect setting can lead to malfunctions of the drive, a malfunction of the control system and consequential costs. The manufacturer does not accept any responsibility for incorrect settings and their consequences.Adoption of changes after restarting the OEM Motoric Valve Drive: 24 V Modbus RTU.<\/p>\n","protected":false},"excerpt":{"rendered":"

FUNCTION DESCRIPTION DISPLAY DEVICE OPERATIONS Read Read from device Reading out the settings of the OEM Motoric Valve Drive: 24 V Modbus RTU \u2013 Ready to scan:Hold your smartphone near to NFC tag \u2013 Display:Data was read successfullyorError message\u2192 Repeat the process: The mobile device was moved too early or should be aligned more precisely. […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"inline_featured_image":false,"footnotes":""},"doc_category":[32],"doc_tag":[],"knowledge_base":[33],"class_list":["post-7156","docs","type-docs","status-publish","hentry","doc_category-motoric-valve-drive-6-24-v-modbus-en","knowledge_base-motoric-valve-drive-6"],"year_month":"2026-04","word_count":578,"total_views":"3","reactions":{"happy":"0","normal":"0","sad":"0"},"author_info":{"name":"Sandra Palm","author_nicename":"spalm","author_url":"https:\/\/faqdoc.info\/en\/author\/spalm\/"},"doc_category_info":[{"term_name":"Motoric Valve Drive 6: 24 V modbus","term_url":"https:\/\/faqdoc.info\/en\/systemauswahl\/motoric-valve-drive-6\/motoric-valve-drive-6-24-v-modbus-en\/"}],"doc_tag_info":[],"knowledge_base_info":[{"term_name":"motoric valve drive 6","term_url":"https:\/\/faqdoc.info\/en\/systemauswahl\/motoric-valve-drive-6\/","term_slug":"motoric-valve-drive-6"}],"knowledge_base_slug":["motoric-valve-drive-6"],"_links":{"self":[{"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/docs\/7156","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/comments?post=7156"}],"version-history":[{"count":4,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/docs\/7156\/revisions"}],"predecessor-version":[{"id":7168,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/docs\/7156\/revisions\/7168"}],"wp:attachment":[{"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/media?parent=7156"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/doc_category?post=7156"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/doc_tag?post=7156"},{"taxonomy":"knowledge_base","embeddable":true,"href":"https:\/\/faqdoc.info\/en\/wp-json\/wp\/v2\/knowledge_base?post=7156"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}